Filter Housing for Gel Seal Filter

  • 20, 01, 2021


HEPA Filter Housing, also called HEPA Box, Air Plenum Box, Air Inlet, is used to holing HEPA filter. For different type of air filters, the filter housing is different. Three types of filter housing are available: HEPA Housing for Gasket Seal HEPA Filter, HEPA Housing for Gel Seal HEPA Filter with gel-filled side channel and HEPA Housing for Gel Seal HEPA Filter with gel-filled top channel.


Description

HEPA Housing for Gel-seal Filter with Side Channel

Picture: HEPA Box for Gel Seal HEPA Filter with Gel-filled Side Channel

1. Casing      2. Filter Housing    3. Positing Clam     4. Bolt    5. HEPA Filter     6. Air Diffuser (Square or Swirl Diffuser)  7. Sealing Pad,  8. Duct Flange  9. Perforated Plate   10. Hanging Hole

 

HEPA Housing for Gel-seal Filter with Top Channel

HEPA Box for Gel Seal HEPA Filter with Gel-filled Top Channel

1. Casing      2. Filter Housing    3. Positing Clam     4. Bolt    5. HEPA Filter     6. Air Diffuser (Square or Swirl Diffuser)  7. Sealing Pad,  8. Duct Flange  9. Perforated Plate   10. Hanging Hole

Note:  As showed in above photo, the upstream air supply (connected with air duct) is from the side of the housing,  Another upstream air supply type is from the top of the housing, that is, there are two air supply types: top-supply housing and side-supply housing. It can be customized according to installation condition.

VCR Cleanroom Equipment specializes in providing equipment to contractors, for more information you can visit our official website:

Https://en.vietnamcleanroom.com

Hotline: +8490.123.9008/+8490.123.7008

 

 

 

 

Related Articles